The method to solve the switch fault of CNC machine tool
In the equipment management of CNC machine tools, the maintenance and diagnosis of machine tool equipment is an inevitable topic. Only by solving and discovering the problems in machine tool equipment immediately can the stability and safety of machine tool equipment in our country be guaranteed.
Regarding the discussion and analysis of mechanical equipment fault diagnosis and equipment maintenance in the whole process of machine tool equipment management, the key content of this paper is analyzed and explained from two levels. The first level is the switch failure problem in the CNC machine tool equipment and the corresponding solution. The second level is the failure problem of the failure alarm device in the machine tool equipment and the corresponding solution. The following is a detailed analysis and explanation.
The method to solve the switch failure of CNC machine tool:
Regarding the analysis and elaboration of the switch failure problem in machine tool equipment and the corresponding solutions, the key to the content of the article is to analyze and elucidate from two levels. One level is the failure of the machine tool equipment switch. The second level is the CNC machine tool to introduce the corresponding solution to the switch failure of the machine tool equipment. Detailed analysis and elaboration are carried out below.
The generator set switch in the CNC machine tool equipment generally has a relatively independent normally closed or switch switch with bleeding. The key function of the switch in the machine tool equipment is to perform chain operation and failure of the mechanical equipment.
The CNC lathe switch is generally exposed to the outside world of the CNC lathe, resulting in a weak office environment for the CNC lathe switch, and there is a lot of dust in the entire working process. Once dust enters the switch of the CNC lathe, it will cause the switch's main movement to fail, and the main movement is dry and wet. In this case, the CNC lathe switch will fail, which must be found and resolved immediately.