In this way, it is easier to install the turning milling compound machine tool
In recent years, one of the rapidly developing processing methods is the turning milling compound machine tool. In addition to the functions on the CNC lathe, it can also complete plane milling, drilling, tapping, straight groove, spiral groove and gear milling, and can realize the processing concept of one-time clamping and full completion. Therefore, we should also pay attention to some small details when installing the turning milling compound machine tool. In the future, we can use the CNC lathe easily in the production process.
Installation environment conditions:
1. Places without high heat generating devices.
2. Places without floating dust and metal particles.
3. Places without corrosive and flammable gas and liquid.
4. Places without water drops, steam, dust and oily dust.
5. Places without electromagnetic noise interference.
6. Firm and vibration free place.
7. The applicable ambient temperature is 0 ℃ - 55 ℃. If the ambient temperature exceeds 45 ℃, please place the driver in a well ventilated or cold air room.
Precautions for installation:
1. The installation direction must comply with the regulations, otherwise it will cause servo failure.
2. The suction and exhaust holes of the driver shall not be sealed or placed upside down during installation, otherwise it will cause failure.
3. Do not install it near or near combustibles.
4. When fixing the drive, ensure that each fixing position is locked.
5. It shall be installed where it can bear weight.